View NCP4680DSQ12T1G_7231850.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? semiconductor components industries, llc, 2011 june, 2011 ? rev. 1 1 publication order number: ncp4680/d ncp4680 150 ma, low noise low dropout regulator the ncp4680 is a cmos linear voltage regulator with 150 ma output current capability. the device is available in a tiny 0.8x0.8 mm xdfn, and has high output voltage accuracy, low supply current and high ripple rejection. the ncp4680 is easy to use and includes output current fold ? back protection. a chip enable function is included to save power by lowering supply current. the line and load transient responses are very good, making this regulator ideal for use as a power supply for communication equipment. features ? operating input voltage range: 1.40 v to 5.25 v ? output voltage range: 0.8 v to 3.6 v (available in 0.1 v steps) ? output voltage accuracy: 1.0% ? supply current: 50 a typical ? dropout voltage: 0.25 v (i out = 150 ma, v out = 2.5 v) ? high psrr: 75 db (f = 1 khz, v out = 2.5 v) ? line regulation: 0.02%/v typ. ? stable with ceramic capacitors: 0.1 f or more ? current fold back protection ? available in xdfn4 0.8 x 0.8 mm, sc ? 70, sot23 packages ? these are pb ? free devices typical applications ? battery ? powered equipment ? networking and communication equipment ? cameras, dvrs, stb and camcorders ? home appliances vin vout ce gnd c1 c2 100n 100n vin vout ncp4680x figure 1. typical application schematic http://onsemi.com see detailed ordering and shipping information in the package dimensions section on page 17 of this data sheet. ordering information sc ? 70 case 419a xx, xxx= specific device code m, mm = date code a = assembly location y = year w = work week = pb ? free package marking diagrams (note: microdot may be in either location) xxx xmm sot ? 23 ? 5 case 1212 xx m 1 xdfn4 case 711ab xm m 1
ncp4680 http://onsemi.com 2 current limit vref vin gnd ce vout ncp4680hxxxx current limit vref vout vin gnd ce ncp4680dxxxx figure 2. simplified schematic block diagram pin function description pin no. xdfn4* pin no. sc ? 70 pin no. sot23 pin name description 1 4 5 v out output pin 2 3 2 gnd ground 3 1 3 ce chip enable pin (active ?h?) 4 5 1 v in input pin ? 2 4 nc no connection *tab is gnd level. (they are connected to the reverse side of this ic. the tab is better to be connected to the gnd, but leaving it open is also acceptable. absolute maximum ratings rating symbol value unit input voltage (note 1) v in 6.0 v output voltage v out ? 0.3 to v in + 0.3 v chip enable input v ce 6.0 v output current i out 180 ma power dissipation xdfn0808 p d 286 mw power dissipation sc ? 70 380 power dissipation sot23 420 junction temperature t j ? 40 to 150 c storage temperature t stg ? 55 to 125 c esd capability, human body model (note 2) esd hbm 2000 v esd capability, machine model (note 2) esd mm 200 v stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may af fect device reliability. 1. refer to electrical characteristis and application information for safe operating area. 2. this device series incorporates esd protection and is tested by the following methods: esd human body model tested per aec ? q100 ? 002 (eia/jesd22 ? a114) esd machine model tested per aec ? q100 ? 003 (eia/jesd22 ? a115) latch ? up current maximum rating tested per jedec standard: jesd78.
ncp4680 http://onsemi.com 3 thermal characteristics rating symbol value unit thermal characteristics, xdfn 0.8 x 0.8 mm thermal resistance, junction ? to ? air r ja 350 c/w thermal characteristics, sot23 thermal resistance, junction ? to ? air r ja 238 c/w thermal characteristics, sc ? 70 thermal resistance, junction ? to ? air r ja 263 c/w electrical characteristics ? 40 c t a 85 c; v in = v out(nom) + 1 v or 2.5 v, whichever is greater; i out = 1 ma, c in = c out = 0.1 f, unless otherwise noted. typical values are at t a = +25 c. parameter test conditions symbol min typ max unit operating input voltage v in 1.40 5.25 v output voltage t a = +25 c v out 1.8 v v out x0.99 x1.01 v v out < 1.8 v ? 18 18 mv ? 40 c t a 85 c v out 1.8 v x0.985 x1.015 v v out < 1.8 v ? 50 50 mv output voltage temp. coefficient ? 40 c t a 85 c v out 1.8 v v out / t a 30 ppm/ c v out < 1.8 v 100 line regulation v out(nom) + 0.5 v v in 5.25 v, v in 1.4 v line reg 0.02 0.10 %/v load regulation i out = 1 ma to 150 ma load reg 5 30 mv dropout voltage i out = 150 ma v out = 0.8 v v do 0.70 1.00 v v out = 0.9 v 0.62 0.91 1.0 v v out < 1.2 v 0.56 0.82 1.2 v v out < 1.4 v 0.47 0.67 1.4 v v out < 1.8 v 0.39 0.54 1.8 v v out < 2.1 v 0.33 0.48 2.1 v v out < 2.5 v 0.28 0.40 2.5 v v out < 3.0 v 0.25 0.35 3.0 v v out < 3.6 v 0.23 0.32 output current i out 150 ma short current limit v out = 0 v i sc 40 ma quiescent current i q 50 70 a standby current v ce = 0 v, t a = 25 c i stb 0.1 1.0 a ce pin threshold voltage ce input voltage ?h? v ceh 1.0 v ce input voltage ?l? v cel 0.4 ce pull down current i cepd 0.3 a power supply rejection ratio v in = v out + 1 v, v in = 0.2 v pk ? pk , i out = 30 ma, f = 1 khz psrr 75 db output noise voltage f = 10 hz to 100 khz, i out = 30 ma v out 1.8 v v n 20 x v out v rms v out < 1.8 v 40 x v out low output n ? channel tr. on res- istance v in = 4 v, v ce = 0 v r low 60 minimum start ? up equivalent res- istance v out 1.8 v (note 3) r sumin 13 * v out v out > 1.8 v 6.7 * v out 3. see current limit paragraph in application part for explanation.
ncp4680 http://onsemi.com 4 typical characteristics 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 50 100 150 200 250 300 350 figure 3. output voltage vs. output current 0.8 v version (t j = 25 c) i out (ma) v out (v) v in = 1.4 v 1.5 v 1.6 v 2.8 v 1.8 v 3.8 v 4.8 v 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 50 100 150 200 250 300 350 400 figure 4. output voltage vs. output current 1.8 v version (t j = 25 c) i out (ma) v out (v) v in = 2.2 v 2.8 v 4.8 v 3.8 v 5.25 v 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 50 100 150 200 250 300 350 figure 5. output voltage vs. output current 2.8 v version (t j = 25 c) i out (ma) v out (v) v in = 3 v 3.2 v 4.5 v 3.5 v 5.25 v 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 50 100 150 200 250 300 350 figure 6. output voltage vs. output current 3.3 v version (t j = 25 c) i out (ma) v out (v) v in = 3.5 v 3.6 v 4.5 v 5.25 v 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0 25 50 75 100 125 150 i out (ma) v do (v) figure 7. dropout voltage vs. output current 0.8 v version t j = 85 c 25 c ? 40 c 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0 25 50 75 100 125 150 t j = 85 c 25 c ? 40 c i out (ma) figure 8. dropout voltage vs. output current 1.8 v version v do (v)
ncp4680 http://onsemi.com 5 typical characteristics 0 0.05 0.10 0.15 0.20 0.25 0.30 0 25 50 75 100 125 150 t j = 85 c 25 c ? 40 c i out (ma) figure 9. dropout voltage vs. output current 2.8 v version v do (v) 0 0.05 0.10 0.15 0.20 0.25 0.30 0 25 50 75 100 125 150 t j = 85 c 25 c ? 40 c i out (ma) figure 10. dropout voltage vs. output current 3.3 v version v do (v) 0.75 0.76 0.77 0.78 0.79 0.80 0.81 0.82 0.83 0.84 0.85 ? 40 ? 200 20406080 t j , junction temperature ( c) v out (v) figure 11. output voltage vs. temperature, 0.8 v version v in = 1.8 v 1.75 1.76 1.77 1.78 1.79 1.80 1.81 1.82 1.83 1.84 1.85 t j , junction temperature ( c) figure 12. output voltage vs. temperature, 1.8 v version ? 40 ? 20 0 20 40 60 80 v in = 2.8 v 2.75 2.76 2.77 2.78 2.79 2.80 2.81 2.82 2.83 2.84 2.85 ? 40 ? 200 20406080 t j , junction temperature ( c) v out (v) figure 13. output voltage vs. temperature, 2.8 v version v in = 3.8 v 3.25 3.26 3.27 3.28 3.29 3.30 3.31 3.32 3.33 3.34 3.35 v out (v) v out (v) t j , junction temperature ( c) figure 14. output voltage vs. temperature, 3.3 v version ? 40 ? 20 0 20 40 60 80 v in = 4.3 v
ncp4680 http://onsemi.com 6 typical characteristics 0 20 40 60 80 100 120 012345 i gnd ( a) v in , input voltage (v) figure 15. supply current vs. input voltage, 0.8 v version 0 20 40 60 80 100 120 140 012345 v in , input voltage (v) figure 16. supply current vs. input voltage, 1.8 v version i gnd ( a) 0 20 40 60 80 100 120 140 012345 i gnd ( a) v in , input voltage (v) figure 17. supply current vs. input voltage, 2.8 v version 0 20 40 60 80 100 120 140 012345 v in , input voltage (v) figure 18. supply current vs. input voltage, 3.3 v version i gnd ( a) 40 45 50 55 60 t j , junction temperature ( c) i gnd ( a) figure 19. supply current vs. temperature, 0.8 v version ? 40 ? 20 0 20 40 60 80 40 45 50 55 60 i gnd ( a) t j , junction temperature ( c) figure 20. supply current vs. temperature, 1.8 v version ? 40 ? 20 0 20 40 60 80
ncp4680 http://onsemi.com 7 typical characteristics 40 45 50 55 60 i gnd ( a) t j , junction temperature ( c) figure 21. supply current vs. temperature, 2.8 v version ? 40 ? 20 0 20 40 60 80 40 45 50 55 60 t j , junction temperature ( c) figure 22. supply current vs. temperature, 3.3 v version ? 40 ? 20 0 20 40 60 80 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 012345 v in , input voltage (v) figure 23. output voltage vs. input voltage, 0.8 v version v out (v) i out = 50 ma 30 ma 1 ma 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 012345 i gnd ( a) v in , input voltage (v) figure 24. output voltage vs. input voltage, 1.8 v version v out (v) i out = 50 ma 30 ma 1 ma 0 0.5 1.0 1.5 2.0 2.5 3.0 012345 v in , input voltage (v) figure 25. output voltage vs. input voltage, 2.8 v version v out (v) i out = 50 ma 30 ma 1 ma 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 012345 v in , input voltage (v) figure 26. output voltage vs. input voltage, 3.3 v version v out (v) i out = 50 ma 30 ma 1 ma
ncp4680 http://onsemi.com 8 typical characteristics figure 27. psrr, 0.8 v version, v in = 1.8 v 0 20 40 60 80 100 120 0.1 1 10 100 1000 psrr (db) frequency (khz) i out = 1 ma 30 ma 150 ma figure 28. psrr, 1.8 v version, v in = 2.8 v 0 20 40 60 80 100 120 0.1 1 10 100 1000 i out = 1 ma 30 ma 150 ma psrr (db) frequency (khz) figure 29. psrr, 2.8 v version, v in = 3.8 v 0 20 40 60 80 100 120 0.1 1 10 100 1000 psrr (db) frequency (khz) i out = 1 ma 30 ma 150 ma figure 30. psrr, 3.3 v version, v in = 4.3 v 0 20 40 60 80 100 120 0.1 1 10 100 1000 frequency (khz) psrr (db) i out = 1 ma 30 ma 150 ma figure 31. output voltage noise, 0.8 v version, v in = 1.8 v 0 0.5 1.0 1.5 2.0 2.5 0.01 0.1 1 10 100 1000 v n ( v rms / hz ) frequency (khz) figure 32. output voltage noise, 1.8 v version, v in = 2.8 v 0.1 0.5 1.0 1.5 2.0 2.5 0.01 0.1 1 10 100 1000 frequency (khz) v n ( v rms / hz )
ncp4680 http://onsemi.com 9 typical characteristics figure 33. output voltage noise, 2.8 v version, v in = 3.8 v 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.01 0.1 1 10 100 1000 frequency (khz) v n ( v rms / hz ) figure 34. output voltage noise, 3.3 v version, v in = 4.3 v 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0.01 0.1 1 10 100 1000 frequency (khz) v n ( v rms / hz ) figure 35. line transients, 0.8 v version, t r = t f = 5 s, i out = 30 ma 0.797 0.798 0.799 0.800 0.801 0 102030405060708090100 1.3 1.8 2.3 2.8 3.3 v out (v) t ( s) v in (v) 1.797 1.798 1.799 1.800 1.801 0 102030405060708090100 2.3 2.8 3.3 3.8 4.3 figure 36. line transients, 1.8 v version, t r = t f = 5 s, i out = 30 ma v out (v) t ( s) v in (v)
ncp4680 http://onsemi.com 10 typical characteristics figure 37. line transients, 2.8 v version, t r = t f = 5 s, i out = 30 ma 2.797 2.798 2.799 2.800 2.801 0 102030405060708090100 3.3 3.8 4.3 4.8 5.3 v out (v) t ( s) v in (v) figure 38. line transients, 3.3 v version, t r = t f = 5 s, i out = 30 ma 3.297 3.298 3.299 3.300 3.301 3.302 0 102030405060708090100 3.8 4.3 4.8 5.3 5.8 v out (v) t ( s) v in (v) figure 39. load transients, 0.8 v version, i out = 50 ? 100 ma, t r = t f = 0.5 s, v in = 1.8 v 0.77 0.78 0.79 0.80 0.81 0.82 0.83 0 102030405060708090100 0 50 100 150 v out (v) t ( s) i out (ma)
ncp4680 http://onsemi.com 11 typical characteristics figure 40. load transients, 1.8 v version, i out = 50 ? 100 ma, t r = t f = 0.5 s, v in = 2.8 v 1.77 1.78 1.79 1.80 1.81 1.82 1.83 0 102030405060708090100 0 50 100 150 v out (v) t ( s) i out (ma) figure 41. load transients, 2.8 v version, i out = 50 ? 100 ma, t r = t f = 0.5 s, v in = 3.8 v 2.77 2.78 2.79 2.80 2.81 2.82 2.83 0 102030405060708090100 0 50 100 150 v out (v) t ( s) i out (ma) figure 42. load transients, 3.3 v version, i out = 50 ? 100 ma, t r = t f = 0.5 s, v in = 4.3 v 2.77 2.78 2.79 2.80 2.81 2.82 2.83 0 102030405060708090100 0 50 100 150 v out (v) t ( s) i out (ma)
ncp4680 http://onsemi.com 12 typical characteristics figure 43. load transients, 0.8 v version, i out = 1 ? 150 ma, t r = t f = 0.5 s, v in = 1.8 v 0.65 0.70 0.75 0.80 0.85 0.90 0 102030405060708090100 0 75 150 225 v out (v) t ( s) i out (ma) figure 44. load transients, 1.8 v version, i out = 1 ? 150 ma, t r = t f = 0.5 s, v in = 2.8 v 1.65 1.70 1.75 1.80 1.85 1.90 0 102030405060708090100 0 75 150 225 v out (v) t ( s) i out (ma) figure 45. load transients, 2.8 v version, i out = 1 ? 150 ma, t r = t f = 0.5 s, v in = 3.8 v 2.65 2.70 2.75 2.80 2.85 2.90 0 102030405060708090100 0 75 150 225 v out (v) t ( s) i out (ma)
ncp4680 http://onsemi.com 13 typical characteristics figure 46. load transients, 3.3 v version, i out = 1 ? 150 ma, t r = t f = 0.5 s, v in = 4.3 v 3.15 3.20 3.25 3.30 3.35 3.40 0 102030405060708090100 0 75 150 225 v out (v) t ( s) i out (ma) figure 47. start ? up, 0.8 v version, v in = 1.8 v ? 0.2 0 0.2 0.4 0.6 0.8 0 5 10 15 20 25 30 35 40 45 50 0 0.5 1.0 1.5 2.0 v out (v) v ce (v) t ( s) chip enable i out = 100 ma i out = 1 ma ? 0.5 0 0.5 1.0 1.5 2.0 0 5 10 15 20 25 30 35 40 45 50 0 1 2 3 4 v out (v) v ce (v) t ( s) chip enable i out = 150 ma i out = 1 ma figure 48. start ? up, 1.8 v version, v in = 2.8 v
ncp4680 http://onsemi.com 14 typical characteristics figure 49. start ? up, 2.8 v version, v in = 3.8 v ? 0.5 0 0.5 1.0 1.5 2.0 2.5 3.0 0 5 10 15 20 25 30 35 40 45 50 0 1.5 3.0 4.5 v out (v) v ce (v) t ( s) chip enable i out = 150 ma i out = 1 ma figure 50. start ? up, 3.3 v version, v in = 4.3 v ? 1 0 1 2 3 4 0 5 10 15 20 25 30 35 40 45 50 0 1.5 3.0 4.5 6.0 v out (v) v ce (v) t ( s) chip enable i out = 150 ma i out = 1 ma figure 51. shutdown, 0.8 v version d, v in = 1.8 v ? 0.2 0 0.2 0.4 0.6 0.8 0 102030405060708090100 0 0.5 1.0 1.5 2.0 v out (v) v ce (v) t ( s) chip enable i out = 30 ma i out = 1 ma i out = 100 ma
ncp4680 http://onsemi.com 15 typical characteristics figure 52. shutdown, 1.8 v version d, v in = 2.8 v ? 0.5 0 0.5 1.0 1.5 2.0 0 102030405060708090100 0 1 2 3 4 v out (v) v ce (v) t ( s) chip enable i out = 30 ma i out = 1 ma i out = 150 ma figure 53. shutdown, 2.8 v version d, v in = 3.8 v ? 0.5 0 0.5 1.0 1.5 2.0 2.5 3.0 0 102030405060708090100 0 1.5 3.0 4.5 v out (v) v ce (v) t ( s) chip enable i out = 30 ma i out = 1 ma i out = 150 ma figure 54. shutdown, 3.3 v version d, v in = 4.3 v ? 1 0 1 2 3 4 0 102030405060708090100 0 1.5 3.0 4.5 6.0 v out (v) v ce (v) t ( s) chip enable i out = 30 ma i out = 1 ma i out = 150 ma
ncp4680 http://onsemi.com 16 application information a typical application circuit for ncp4680 series is shown in figure 55. vin vout ce gnd c1 c2 100n 100n vin vout ncp4680x figure 55. typical application schematic input decoupling capacitor (c1) a 0.1 f ceramic input decoupling capacitor should be connected as close as possible to the input and ground pin of the ncp4680. higher values and lower esr improves line transient response. output decoupling capacitor (c2) a 0.1 f ceramic output decoupling capacitor is enough to achieve stable operation of the ic. if a tantalum capacitor is used, and its esr is high, loop oscillation may result. the capacitors should be connected as close as possible to the output and ground pins. larger values and lower esr improves dynamic parameters. current limit the ncp4680 includes fold ? back type current limit protection. its typical characteristic for 0.8 v version is shown in figure 3. the advantage of this protection is that power loss at the regulator is minimized at over current or short circuit conditions. when the over current or short circuit event disappears, the regulator reverts from fold back to regulation. this kind of current limit may cause issues at start ? up for voltage versions below 1.8 v and some load types: for these lower voltage options it is recommended to start ? up into at least double the minimum equivalent load. the minimum equivalent resistance can be computed by formula 1: r eqmin v out(nom) i outmax (eq. 1) this leads us to the result that the minimum equivalent start up resistance for v out(nom) < 1.8 v is: r sumin 2 r eqmin (eq. 2) enable operation the enable pin ce may be used for turning the regulator on and off. the ic is switched on when a high level voltage is applied to the ce pin. the enable pin has an internal pull down current source. if the enable function is not needed connect ce pin to vin. output discharger the d version includes a transistor between vout and gnd that is used for faster discharging of the output capacitor. this function is activated when the ic goes into disable mode. thermal as power across the ic increase, it might become necessary to provide some thermal relief. the maximum power dissipation supported by the device is dependent upon board design and layout. mounting pad configuration on the pcb, the board material, and also the ambient temperature affect the rate of temperature increase for the part. when the device has good thermal conductivity through t he pcb the junction temperature will be relatively low in high power dissipation applications. pcb layout make the vin and gnd line as large as practical. if their impedance is high, noise pickup or unstable operation may result. connect capacitors c1 and c2 as close as possible to the ic, and make wiring as short as possible.
ncp4680 http://onsemi.com 17 ordering information device nominal output voltage description marking package shipping ? ncp4680dmx10tcg 1.0 v auto discharge a (fixed)* xdfn4 (pb ? free) 10000 / tape & reel ncp4680dmx12tcg 1.2 v auto discharge a (fixed)* xdfn4 (pb ? free) 10000 / tape & reel ncp4680dmx15tcg 1.5 v auto discharge a (fixed)* xdfn4 (pb ? free) 10000 / tape & reel ncp4680dmx18tcg 1.8 v auto discharge a (fixed)* xdfn4 (pb ? free) 10000 / tape & reel ncp4680dmx23tcg 2.3 v auto discharge a (fixed)* xdfn4 (pb ? free) 10000 / tape & reel ncp4680dmx28tcg 2.8 v auto discharge a (fixed)* xdfn4 (pb ? free) 10000 / tape & reel ncp4680dmx30tcg 3.0 v auto discharge a (fixed)* xdfn4 (pb ? free) 10000 / tape & reel ncp4680dmx33tcg 3.3 v auto discharge a (fixed)* xdfn4 (pb ? free) 10000 / tape & reel ncp4680dsq08t1g 0.8 v auto discharge af08 sc ? 70 (pb ? free) 3000 / tape & reel ncp4680dsq09t1g 0.9 v auto discharge af09 sc ? 70 (pb ? free) 3000 / tape & reel NCP4680DSQ12T1G 1.2 v auto discharge af12 sc ? 70 (pb ? free) 3000 / tape & reel ncp4680dsq15t1g 1.5 v auto discharge af15 sc ? 70 (pb ? free) 3000 / tape & reel ncp4680dsq18t1g 1.8 v auto discharge af18 sc ? 70 (pb ? free) 3000 / tape & reel ncp4680dsq25t1g 2.5 v auto discharge af25 sc ? 70 (pb ? free) 3000 / tape & reel ncp4680dsq28t1g 2.8 v auto discharge af28 sc ? 70 (pb ? free) 3000 / tape & reel ncp4680dsq30t1g 3.0 v auto discharge af30 sc ? 70 (pb ? free) 3000 / tape & reel ncp4680dsq33t1g 3.3 v auto discharge af33 sc ? 70 (pb ? free) 3000 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d. *marking codes for xdfn0808 packages are unified. **to order other package and voltage variants, please contact your on semiconductor sales representative.
ncp4680 http://onsemi.com 18 package dimensions notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. 419a ? 01 obsolete. new standard 419a ? 02. 4. dimensions a and b do not include mold flash, protrusions, or gate burrs. dim a min max min max millimeters 1.80 2.20 0.071 0.087 inches b 1.15 1.35 0.045 0.053 c 0.80 1.10 0.031 0.043 d 0.10 0.30 0.004 0.012 g 0.65 bsc 0.026 bsc h --- 0.10 --- 0.004 j 0.10 0.25 0.004 0.010 k 0.10 0.30 0.004 0.012 n 0.20 ref 0.008 ref s 2.00 2.20 0.079 0.087 b 0.2 (0.008) mm 12 3 4 5 a g s d 5 pl h c n j k ? b ? sc ? 88a (sc ? 70 ? 5/sot ? 353) case 419a ? 02 issue k
ncp4680 http://onsemi.com 19 package dimensions sot ? 23 5 ? lead case 1212 ? 01 issue a dim min max millimeters a1 0.00 0.10 a2 1.00 1.30 b 0.30 0.50 c 0.10 0.25 d 2.70 3.10 e 2.50 3.10 e1 1.50 1.80 e 0.95 bsc l l1 0.45 0.75 notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimensions: millimeters. 3. datum c is the seating plane. a 1 5 23 4 d e1 b l1 e e c m 0.10 c s b s a b 5x a2 a1 s 0.05 c l 0.20 --- *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* 0.95 dimensions: millimeters pitch 5x 3.30 0.56 5x 0.85 a --- 1.45 recommended a
ncp4680 http://onsemi.com 20 package dimensions xdfn4 0.8x0.8, 0.48p case 711ab ? 01 issue o notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. dimension b applies to plated terminals. 4. coplanarity applies to the exposed pad as well as the terminals. a b e d d2 bottom view b e 4x note 3 2x 0.05 c pin one reference top view 2x 0.05 c a a1 (a3) 0.05 c 0.05 c c seating plane side view l 3x 1 2 dim min max millimeters a ??? 0.40 a1 0.00 0.05 a3 0.10 ref b 0.17 0.27 d 0.80 bsc d2 0.20 0.30 e 0.80 bsc e 0.48 bsc l 0.23 0.33 l2 0.17 0.27 *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. mounting footprint* detail a 1.00 0.27 0.44 4x dimensions: millimeters 0.32 recommended package outline l2 detail a l3 detail b l3 0.01 0.11 detail b note 4 e/2 45 a m 0.05 b c 4 3 0.48 pitch 4x 0.17 4x 0.37 0.07 3x 0.06 ref on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5773 ? 3850 ncp4680/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative

▲Up To Search▲

Price & Availability of NCP4680DSQ12T1G

	To Download NCP4680DSQ12T1G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .